RC8BE באגי 1/8 חשמלית מקצועית 4X4

Features

• Pre-assembled shocks, diffs, and turnbuckles with Factory Team shock and diff fluids included
• Factory Team 16mm Big Bore threaded, hard-anodized shocks feature heavy-duty 4mm TiN coated stainless steel shock shafts for maximum smoothness
• Updated 5mm 7075 blue aluminum shock towers allow the driver to stand the shock angle up for a more aggressive suspension
• Optimized front upper camber link bushings allow for easier tuning and maintenance
• 7075 blue aluminum suspension mounts front and rear
• Molded bushings allow for easy and quick adjustment of rear toe-in, rear anti-squat, and front kick-up
• Optimized steering geometry for more consistency and reduced bump-steer
• Updated wing mount with additional clearance for 16mm shocks
• Molded battery tray supports two R.O.A.R. approved 1:10 scale size 7.4v LiPo battery packs with room for foam pads
• Molded composite front and rear chassis braces
• Factory Team 83mm wheels, Pro-Line M3 Holeshots with molded inserts included
• Lightweight blue aluminum motor mount
• Factory Team 7075 blue aluminum one-piece top plate
• Lightweight 3mm hard-anodized chassis
• 4.30:1 ratio gearboxes for maximum punch
• Two-piece split-center diff mount allows quick and easy access to the center diff
• Caster blocks adjust 14°, 16°, or 18° with molded inserts
• 3.5mm light CVA drivetrain with full ball bearings
• Rear molded CVA boots to keep dirt and mud out of rear joints
• Blue aluminum hexes and nylon locking wheel nuts
• Tough steel-alloy shock stand-offs

Items Needed: RC8Be

• R/C 2-channel surface frequency radio system
• Batteries:
  qty 1 or 2 6-cell NiMH type packs (7.4v) OR
  qty 1 or 2 2-cell LiPo type packs (7.4v, 11.1v, or 14.4v, depending on the compatibility of the speed control)
  Note: if running LiPo, the charger and speed control have to be LiPo compatible.
• Battery charger (peak detection charger recommended)
• Electronic speed control
• RC electric motor
• Tire adhesive
• Paint for Lexan body
• Tools: Phillips screwdriver, needlenose pliers, pencil-type soldering iron with Rosin core solder to solder motor wires, thread-locking compound, hobby knife, precision ruler, body scissors.

Specs: RC8Be

*Actual weight will vary depending on the electronics used in the finished kit.